Call: 604-703-0158 Toll Free: 1-844-DIY-BREW
Craft Brewing Supplies Store
BrewZilla All Grain Electric Brew System With Pump (110V)
35L BrewZilla All Grain Electric Brew System With Pump (110V) Version 3.1.1
If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the BrewZilla (formerly known as the Robobrew) is a complete turn key solution. The BrewZilla is an all-in-one electric brewery that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere.
The built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.
Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.
The digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don’t worry about spills or some water dripping down the side. This controller is built for brewing!
The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the BrewZilla and tabs at the base so you can set the malt pipe over the BrewZilla to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.
The included stainless wort chillers is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.
- Stainless Steel Construction
- 9 Gallons Total Capacity Produces 5-6 Gallons of Beer
- Digital Temperature Controller
- 110v Power and Plug
- Dual Heating Elements for Better Control (1000 watts and 500 watts)
- Stainless Steel 1/2″ Ball Valve for Draining
- Stainless Steel Immersion Wort Chiller Included
- Stainless Steel Malt Pipe/Basket
- Stamped in Volume Markings
- Glass lid
- Magnetic Drive Pump for Recirculation
- Stainless Steel Recirculation Arm
- Temperature Displays In °F or °C
|Dimensions||16 × 16 × 30.5 in|
Only logged in customers who have purchased this product may leave a review.