Cornelius Keg Carbonation Lid Assembly

$31.99

Quickly carbonate your kegged beer!

In stock

Description

Cornelius Keg Carbonation Lid Assembly

The cornelius keg carbonation lid assembly features a 0.5 micron stainless steel diffusion stone attached to the bottom of a standard cornelius keg lid by 20″ of vinyl tubing. A welded gas-in post on the lid means you can infuse C02 directly into your kegged beer from the bottom, and have it permeate up through the beer in fine bubbles for rapid carbonation. Fits all oval lid kegs and includes a lid sealing O ring and relief valve.

How to Use: Install the lid on your keg of beer and chill the keg to 4°C. Once cold, attach your ball lock gas line to the ball lock post on the lid, and set your dispensing pressure for 25 PSI. Leave for ~ 6 hours and then remove the gas line. Attach your gas line to the IN side of your keg, (removing it from the lid) and release the head pressure in the keg. Then turn on your gas to dispensing pressure ~ 6-8 PSI and enjoy your quickly carbed beer.

Assembly Includes:

  • Cornelius Keg Lid With Welded Gas-In Post
  • Silicone Keg Lid O-Ring
  • 20″ Vinyl Tubing Oetiker Clamped To Lid
  • 0.5 Micron Barbed Diffusion Stone

Additional information

Weight .75 lbs
Dimensions 5.5 × 5.5 × 2.5 in
  1. turek.jake (verified owner)

    Incredibly difficult to get it to work with my Goldsteam keg. The one time I was able to get it in, I found out the fit wasn’t good enough to seal. I swapped the o-ring with the one from my keg and couldn’t get it back in place. Back to shaking I go!

  2. Colin Reid (verified owner)

    This worked well for me. I read a comment about it not working well. I always add some food grade silicone sealant to my o-rings and have not had any trouble. It may help this product seal to the keg.

Only logged in customers who have purchased this product may leave a review.