10 Gallon Cooler Mash Tun with 10″ False Bottom

$139.99

Great for maintaining your mash temperature to within 2°F during a standard 60 minute single infusion.

In stock

Description

10 Gallon Cooler Mash Tun with 10″ False Bottom

The beverage cooler of choice for mash tun conversions. Igloo’s reputation in the cooler industry is 2nd to none, and these beverage coolers are no exception. This cooler will maintain temperature to within 2°F during a 60-90 minute mash. We’ve tried many coolers in our day, and we’ve yet to find one better. Our conversion kit is made entirely of stainless steel hardware to ensure the greatest strength, durability and safety. Our standard bulkhead kit includes a 3-pc ball valve, a washer, nipple, grooved locking hex net with silicone gasket and a false bottom with a hose barb and silicone tubing to pickup the wort.

Some assembly is required. Use Teflon tape (not included) on both sides of the nipple for the hex nut and ball valve attachment. Always test for leaks prior to use. If you encounter a leak, ensure that the teflon tape was applied correctly and ensure the attachments are tightly secured to the cooler wall. While holding the hex nut with a wrench on the inside of the cooler, use another wrench to tighten the ball valve on the outside. You may have to re-position the fittings to ensure an upright ball valve, but once securely fastened, the bulkhead will not leak.

If you plan to consistently make 5 gallon, single infusion batches with grain bills of less than 12 lbs, we recommend the less expensive and very capable: 5 Gallon Converted Cooler Mash Tun

  • Igloo’s UltraTherm Insulation Will Keep Your Mash 2°F During A 60-90 Min Period
  • Impact-Resistant Plastic With Reinforced Handles For Strength And Product Longevity
  • UV Inhibitors Protect Against Sun Damage
  • Pressure-Fit Lid Won’t Trap Dirt/Mold
  • Keeper Cord Affixes Lid To Cooler For Cleanliness And Loss Prevention
  • Flat Lid Makes For A Great Beer-Drinking Seat While You Wait On Conversion
  • Retrofitted With Stainless Steel Bulkhead For Durability And Safety
  • Comes Standard With A 3-Piece Stainless Steel Ball Valve
  • 10″ Stainless Steel Domed False Bottom Assembly

Please Note: This mash tun will come with a 2 piece stainless steel ball valve, as we’re currently sold out of our 3 piece ball valves.

Additional information

Weight 10.4 lbs
Dimensions 18 × 18 × 24 in
  1. Ross Kirby (verified owner)

    Holds mash temperature extremely well. Serves as a great spare tank for holding hot sparge water too within a few degrees F over 90 minutes. Well built, and delivered safely.

Only logged in customers who have purchased this product may leave a review.

  • Brewer's Edge Mash and Boil All Grain Electric Brew System
    Add to cart
    Add to cart

    Brewer’s Edge Mash and Boil Electric Brew System (110V)

    $399.99
  • Stainless Steel Mash Paddle
    Add to cart
    Add to cart

    Stainless Steel Mash Paddle

    $29.99
  • 1500 Watt Stainless Steel Brewing Element
    Select options
    Select options

    1500 Watt Stainless Steel Brewing Element

    $39.99
  • Stainless Steel Side Pickup Tube
    Add to cart
    Add to cart

    Stainless Steel Side Pickup Tube 1/2″ NPT

    $6.99
  • 4500 Watt Stainless Steel Brewing Element
    Select options
    Select options

    4500 Watt Stainless Steel Brewing Element

    $59.99
  • 10" Stainless Steel Domed False Bottom
    Add to cart
    Add to cart

    10″ Stainless Steel Domed False Bottom

    $24.99
  • Sale! 11" Stainless Steel Sanke False Bottom
    Add to cart
    Add to cart

    11″ Stainless Steel Sanke False Bottom

    $24.99 $19.99
  • Plastic Stir Spoon (28")
    Add to cart
    Add to cart

    28″ Plastic Stir Spoon

    $5.99
  • 10 Gallon Converted Cooler Mash Tun
    Add to cart
    Add to cart

    10 Gallon Cooler Mash Tun with 12″ False Bottom

    $154.99
  • 11" Weldless Sight Gauge
    Add to cart
    Add to cart

    11″ Weldless Sight Gauge

    $19.99