Description

Stainless Steel Magnetic Brew Pump Center Inlet

Constructed from 304 stainless steel, this budget-friendly professional quality magnetic brew pump can handle boiling wort with ease. The centrifugal pump is not self priming, but the center inlet design allows for quick and easy priming without the need to purchase additional hardware. Place the pump below the kettle or mash tun, to help ensure the pump is primed prior to switching on. The magnetic drive acts as a clutch allowing the brewer to put back pressure on the pump to slow down flow without causing damage. Brew with confidence, knowing that your wort is passing through 100% stainless steel with no contact from lubricated bearings that can potentially contaminate your wort.

The pump is shipped ready for installation. The six screws on the pump head may be removed and the pump head can be rotated as required to fit your mounting set-up and for cleaning the propeller and shaft. The outlet flow direction should always face up.

Follow all local electrical safety codes and always disconnect power before performing work on or near the pump motor.

Material: 304 Stainless Steel
Max. Flow: 16/19 L Per Minute
Max. Head: 2.7/3.4 Meter
Rated Speed: 2600/3000 RPM
Electrical: 110V 50/60Hz | 100/120 mA
Temperature Rating: 0-140°C (32-284°F)
Inlet/Outlet Connections: 1/2″ NPT Threading

Additional information