Call: 604-316-7454 Email: sales@goldsteam.com
Craft Brewing Supplies Store
Description
Stainless Steel Beer Faucet Shank with Tailpiece Assembly – 4 inch
The Stainless Steel Faucet Shank comes with a back nut, plastic collar, hex nut, and a 90° x 3/16″ ID tailpiece assembly. Requires a 1″ hole saw for installation. When set in place, the shank will only have about 2 1/8″ of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Additional information
| Weight | .7 lbs |
|---|---|
| Dimensions | 2.5 × 2.5 × 5.25 in |
Only logged in customers who have purchased this product may leave a review.
Colin Reid (verified owner) –
These work great. When I made my keezer, I wanted it to last so I went with all stainless fittings and equipment. Not much more expensive than the chrome plated ones and they are quick to install and easy to clean. I like the bent tail piece. It helps run my lines down and out of the way of the kegs.